0
Owner's of the Pentax Digital Camera Digital Camera gave it a score of 0 out of 5. Here's how the scores stacked up:
3
Shooting
35
3 Press B, and use V to
compensate the flash
output.
Press M to reset the value.
4 Press E.
The camera returns to standby mode.
5 Slide the flash pop-up
switch.
uCaution
• Be sure to retract the built-in flash if not planning to use it. Be
careful not to get your fingers pinched when retracting the
flash.
• The built-in flash discharges even when retracted, which may
cause vignetting to occur depending on the lens being used.
If you do not want to let the built-in flash discharge while it is
retracted, set [11. Flash When Retracted] in the E2 menu.
• You cannot take pictures while the flash is being charged. If
you want to take pictures while charging the flash, set [12.
Release While Charging] in the E2 menu.
• Depending on the lens being used, the use of the built-in flash
may be limited. (p.72)
tMemo
• The flash modes that can be selected vary depending on the
capture mode.
*1 Fixed to J for some S modes.
• The built-in flash is optimum for a subject at a distance from
approx. 0.7 m to 5 m. Vignetting may occur when used at a
distance closer than 0.7 m (this distance varies slightly
depending on the lens being used and the sensitivity setting).
• For details on using an external flash, refer to “Functions
when Using an External Flash” (p.74).
Auto Flash Discharge
Auto Flash Discharge
Cancel
Cancel
OK
OK
OK
MENU
+0.7
+0.7
Capture Mode Selectable Flash Mode
R, S
*1
A, J
U A, B, C, D, J
G, J A, B, C, D, E, F, H, J
I A, B, C, D, G, J
L C, D, G, J
Sensitivity
Guide
Number
Sensitivity
Guide
Number
ISO 100 Approx. 4.9 ISO 1600 Approx. 20
ISO 200 Approx. 7 ISO 3200 Approx. 28
ISO 400 Approx. 10 ISO 6400 Approx. 40
ISO 800 Approx. 14 ISO 12800 Approx. 56
Find Your Products By Category
Please Login
