0
Owner's of the Leica Digital Camera 18489 gave it a score of 0 out of 5. Here's how the scores stacked up:
Preparations
Saving your pictures
(to an inserted memory card or the built-in memory)
- 20 -
Pictures will be saved to a card if one is inserted, or to the built-in memory if not.
■
Built-in memory (approx. 87 MB)
●
Pictures can be copied between cards and the built-in memory. (→169)
●
The access time for the built-in memory may be longer than the access time for a
card.
■
Compatible memory cards
The following SD standard-based cards can be used.
Type of Card Capacity Notes
SD Memory Cards 8 MB – 2 GB • Can be used with devices compatible with the
respective formats.
• Before using SDXC Memory Cards, check that
your computer and other devices support this type
of card.
• Use a card of SD Speed “Class 4”
*
or higher for
recording motion pictures.
• Only the cards listed on the left with the given
capacities are supported.
SDHC Memory Cards 4 GB – 32 GB
SDXC Memory Cards 48 GB, 64 GB
*
SD speed class refers to a specification for sustained write speeds. Confirm the SD speed by
checking the card label or other card related materials.
(Example)
●
While the camera is accessing the card or the built-in memory (for an operation such
as picture writing, reading, deleting, or formatting), do not turn off the camera or
remove the battery, or the card, and, if connected to the mains through the charger/
AC adapter, do not interrupt this connection. Do not subject the camera to vibrations,
impact, or static electricity. The card or the data on the card may be damaged, and the
camera may no longer operate normally. If an operation fails due to vibration, impact
or static electricity, perform it again.
●
Please reformat the card with this camera if it has already been
formatted with a computer or another device. (→64)
●
If the write-protect switch is set to “LOCK”, the card cannot be used to
record or delete pictures, and it cannot be formatted.
●
It is recommended that you copy important pictures to your computer
(as electromagnetic fields, static electricity, or faults may cause data
to be damaged).
Switch
Find Your Products By Category
Please Login
